Sold
Guys,
I have a bunch of wika gauges, 315 bar for $50 shipped, each additional gauge is $40. Details below. These are the 1/8" that fit the impact and all that accept 1/8". PayPal friends and family or you cover the fees. Please PM any questions you may have.
Burdon tube pressure gauge, model 1x1.12.26/27
Type: 111.12
Nominal size: 27 mm
Unit of outer Scale: bar
Measuring range: gauge pressure range
Scale range: 0/315 bar
Process Connection: G1/8B
Case material: brass
Accuracy Class: Class 4.0
Pointer: Plastic, Black
Process Connection/Case Surface: blank
Dial: Plastic, White, with Stop Pin
Ingress Protection: Standard
Dial description:
Pressure Gauge Standard: US-Standard
color for 1.scale (outside): black
dial background: White
Manufacturer logo: *WIKA®*
stop pin on dial: at zero
Size comparison with a standard FX impact gauge. Also notice the needle on the FX, its off by almost 50 bar. Please also note, these are the same exact specs that are all over the forum. I have been asked if they fit on edguns and if they are tapered. I dont have a caliper, but if some members can chime in on if these are tapered or not that would be appreciated.
Guys,
I have a bunch of wika gauges, 315 bar for $50 shipped, each additional gauge is $40. Details below. These are the 1/8" that fit the impact and all that accept 1/8". PayPal friends and family or you cover the fees. Please PM any questions you may have.
Burdon tube pressure gauge, model 1x1.12.26/27
Type: 111.12
Nominal size: 27 mm
Unit of outer Scale: bar
Measuring range: gauge pressure range
Scale range: 0/315 bar
Process Connection: G1/8B
Case material: brass
Accuracy Class: Class 4.0
Pointer: Plastic, Black
Process Connection/Case Surface: blank
Dial: Plastic, White, with Stop Pin
Ingress Protection: Standard
Dial description:
Pressure Gauge Standard: US-Standard
color for 1.scale (outside): black
dial background: White
Manufacturer logo: *WIKA®*
stop pin on dial: at zero
Size comparison with a standard FX impact gauge. Also notice the needle on the FX, its off by almost 50 bar. Please also note, these are the same exact specs that are all over the forum. I have been asked if they fit on edguns and if they are tapered. I dont have a caliper, but if some members can chime in on if these are tapered or not that would be appreciated.
