Sling for a ATG Uragan

[Pfddi]

Has anyone put a sling on an AGT Uragan? Looking to add one but somewhat at a loss as to what to do. Trying to get setup to walk for a good distance with gun, tripod and backpack and would like to shoulder the bullpup.

 

[Pauly5]

Sorry no picture, but I have used a single point sling attached to a sling mount on the picatinny rail.

 

[Emu]

I tied a piece of optic fiber to the stock and made a sling for my shoulder. On the other end you can fasten the tie of optic fiber to a metal piece used by the climbers (I do not know how you call it, not even in spanish).

I made same tie for all my short rifles:

 

[Pfddi]

Thanks for the suggestions! @Emu I think I can use a climbers clamp for what you described and it will work great. One of my sons is a rock climber and has many clamps I can test. I’ll post pics after I get it working.

 

[shambozzie]

This setup on my cricket work fine.

 

[cosmic]

carabiner

 

[Pfddi]

@shambozzie - where's the sling?

 

[shambozzie]

@shambozzie - where's the sling?

My bad. It's a one point sling like this. Hook to attachment next to scope.

 

[theLBC]

i prefer 2-point vickers slings from blue force gear. simple and quick to adjust.
the carbine sling from riflesonly.com is another nice option if you want something with a bungee.

as for attachment points, a qd cup up front and if you don't want to install something on the stock, you can just loop one end of the sling around your buttstock, or get an adapter.

 

[Lotte]

So here’s what I did. It allows me to clip off to it. I also experimented with some other things attached to the front, I didn’t like how the front part attached so I haven’t used any slings on it except for single point.
Oh yeah I almost forgot I did have to enlarge the screw and I made sure that the loop went around the screw to give us some strength.