Tuning Regal XL Leaking

[cea1960]

I have an older Daystate Regal XL that will leak all it's air overnight. I don't have the time to fix it myself, plus all my tools are a 1,000 miles away in a storage unit. I'm looking for a well known, qualified and trusted airgun tuner to repair it.

All suggestions are welcome, thanks in advance.

 

[cahil_2]

Airguns of Arizona as they are the US distributor and repair center. 

 

[Skip-in-WV]

I'd start with the fill valve. Charge it, put a balloon over the end of the air tube. Tape it on. If the balloon fills its the valve. Take it out, clean it, reinstall.

 

[elh0102]

Three service choices with which I've been pleased: AOA, Scott Schneider (Motorhead), Martin Rutterford (Airguns-USA).

 

[hitech]

Even though you want to send it off to have someone fix it, mine did the same thing. The valve poppet All you need is an adjustable wrench, and some hex wrenches, and possibly an oring for the poppet. I fixed mine in about 20 minutes. While not the best design, if that poppet gets any debris under that oring, it will leak through the valve and rush out the barrel. Not saying that's what yours is doing, but it's pretty common. I opened mine up and cleaned out the valve area, plenum, out real good and It's been fine. These are pretty easy to work on as long as there isn't any corrosion on the internals.