Red Wolf battery connector

[okieairgunner]

Does anyone have a how to video fixing the terminal connector for the battery? I wanted to see how hard it might be to fix before sending it off.

 

[Erics]

Its not hard if you can solder. I bought these pieces and made my own

Check your pm

 

[Martin3528]

You should be able to trim the black heat shrink on the connector, peel back some of the insulation, and re-solder the wire to the connector. Sounds harder than it should be.

 

[okieairgunner]

Upon closer investigation it should be easy to solder back easy peasy.

 

[woogie_man]

Solder it or get a micro jsb kit and make a new plug.

 

[Erics]

Id recommend fixing the connection upstream with a new connector. The area that broke bends and moves around when you pull the battery. Having the solder joint there will just break again shortly. Atleast in my experience…