Just wanted to share this for the preppers out there hope ya like it. http://s566.photobucket.com/user/Varianplank/library/step 1 take empty pellet tin and make small holes as shown
step 2 insert handful of insulation in one side( this acts like a wick and keeps fuel from sloshing about.
step 3 apply high temp silicone to lip of can and close can tight. Let dry 24 hrs
step 4 pour fuel on top of can and allow fuel to seep into can, may fuels can be used. Heat gas treatment works great and is fairly compact.
step 5 place a penny over center 5 holes and dribble fuel on top and and quickly light. Only attempt this in a safe area with adult supervision. This stove burns like a champ and can also be made with two beer cans
step 2 insert handful of insulation in one side( this acts like a wick and keeps fuel from sloshing about.
step 3 apply high temp silicone to lip of can and close can tight. Let dry 24 hrs
step 4 pour fuel on top of can and allow fuel to seep into can, may fuels can be used. Heat gas treatment works great and is fairly compact.
step 5 place a penny over center 5 holes and dribble fuel on top and and quickly light. Only attempt this in a safe area with adult supervision. This stove burns like a champ and can also be made with two beer cans