Has anyone done the O-ring mod to fix hammer bounce on a Discovery or Maximus. How effective is it? What size O-rings would you need? I've seen a video showing this mod on a Marauder, but the tube is a different diameter.
Thanks
Thanks
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
O-ring Mod for Hammer bounce Discovery/Maximus
- Thread starter kevmck1
- Start date
The tube OD is 7/8" and the ID is 3/4" 1/16"X 3/4' OD should do it for you. These are easily available in hardware stores.
Upvote 0
I don't think that mod really work's for the discos/maximus since they lack a hammer throw adjuster
Upvote 0
I think that is an easy part to add on. Should add a few more shots and lessen the report from the gun due to air loss.
Upvote 0
Didn't work for me. 2 fit. The 3rd was the same place as the breech screw. I got a hammer debounce device from Steve in NC. With a .042in hammer spring I got 40 good shots using the H@N FTT 8.4gr pellet.
Upvote 0
I have a disrovery I added the O rings an got 20 or so shots from 2000psi down to 1800psi I think total shots count is about 45 or so.think I placed 2 O rings the third one made it not in inguage the valve pin.also with 2 rings I can still increase hammer spring tension.hope this helps
Upvote 0
I have the maximus cal 177. I really need some help from you guys
what is the o-ring mod? I could use some more fps and thought about buying the huma regulator and turn max bar.
Please give me a link to o-ring modding and hammer,hammerspring.
If i use the huma air regulator install it with 150bar setup, will my fps increase with higher preasure or am i wrong?
Sorry if my english sucks, i come from denmark
what is the o-ring mod? I could use some more fps and thought about buying the huma regulator and turn max bar. Please give me a link to o-ring modding and hammer,hammerspring.
If i use the huma air regulator install it with 150bar setup, will my fps increase with higher preasure or am i wrong?
Sorry if my english sucks, i come from denmark
Upvote 0
I have the maximus cal 177. I really need some help from you guys
Please give me a link to o-ring modding and hammer,hammerspring.
If i use the huma air regulator install it with 150bar setup, will my fps increase with higher preasure or am i wrong?
Sorry if my english sucks, i come from denmark
Any updates to this?
Links?
Upvote 0