Hi everybody . I will post some pictures of my project. I install a 72 cm LW barrel in my gun. Is a new impact x 3 generation 30 cal. I preorder the gun new on December of 2018 and I receive my order beginning of August of 2019!!!! And the big surprise! I open the box and I see an impact x and not a mkii when the same time in USA they where delevering a second generation of mkii!! Unexeptable but this is a long story that I will post next days. I decided to keep the gun. All these months while I was waiting the gun I prepared all the necessary modes with the help of impact experts of this forum( Ernest , Edosan , heavy impact and so many others sorry if I can’t mention all of them)
1) replacement of reg with a huma extra high pressure
2) hammer weight 7 gram
3 ) install Michał 75 cc plenum from Poland( my project for external plenum under the real block was disaster ! Obviously something I made wrong)
4) brass tp and probe I made it with double holes ) Valve seat 6.5 mm.
5) replacing of course c3 derlin
6) Wika bar meters ( I just receive it didn’t install yet)
7) LW 72 cm 1:16 twist no chocked .
8) I add a utg picatiny rail 10 moa
9) finally install a New S&B pmii scope ( very hard efforts to bye it but finally done
Today I received as well the new version of valve housing with the vs milled from Fx but I didn’t install it yet . I gave it to the lathe to make the threads same dimension with the first vh versions to match in the threads of Michal plenum and to open the hole to 7mm. (As I read somewhere ,from factory is coming 6.5 if I am right)
Regarding the barrel I want to say that my only concern was the right fixing of the crown and the chamber. Is sounding like a joke for a gunsmith but in my country we don’t have any experience because we are not using any riffled barrels( only shotguns allowed ) Finally with a little help of YouTube we manage it and the results was much more better than I could imagine.
I gave a good cleaning the barrel and I was looking forward for the first tests. Ammo 65 grain NSA. Start shooting morning hours temperature was low reg at 175 bar muzzle speed 937 f/s later in afternoon climb at 955 max f/s . I didn’t took measurements from spring tension and valve adjuste screw .
First surprise. First shots after the barrel cleaning at 55 yards almost hole to hole. In my yard I didn’t have big range to shoot but I was shooting from a very stable platform with bipod.Later I tried to go in bigger range and start shooting from 55 up to 170 yards. Unfortunately I was shooting from a very unstable table ( I feel all time I am not stable enough ) the results good enough bad I know was me and the gun can better. In general is like the 65 grain NSA match perfect in this barrel. Sorry I don’t have pictures from grouping . Next week I will make a lot of shooting and I will post results.It surprised me when I shoot some apples at 60 yards and was making them something like steam .No piece to find down .