Hi guys...need help understanding why I have to adjust windage the further my target is, and its not for wind.. so
At 30m its dead on zero
At 60m the hold over is spot on but hitting 0.25Mils to the left
At 83m again hold over is spot on but hitting 0.5Mils to the left
I can put pellet over pellet almost at 60m so the gun is tuned fairly tight
I am dialing in the lift not holding over, and it seems the further I go the more the gun shoots to the left. I have checked scope mounting and made sure it is flat with the rails, using a bubble level on the gun to make sure I am not canted when shooting, could the scope be misaligned left to right with the barrel? is there a way to check that?
My set up is, Impact MKII shooting .25 - 34gr JSBs threw a 700mm slug liner - fps is set to 910ish ,,, The scope is a FFP thats why I use Mills to measure.
Thank you!
At 30m its dead on zero
At 60m the hold over is spot on but hitting 0.25Mils to the left
At 83m again hold over is spot on but hitting 0.5Mils to the left
I can put pellet over pellet almost at 60m so the gun is tuned fairly tight
I am dialing in the lift not holding over, and it seems the further I go the more the gun shoots to the left. I have checked scope mounting and made sure it is flat with the rails, using a bubble level on the gun to make sure I am not canted when shooting, could the scope be misaligned left to right with the barrel? is there a way to check that?
My set up is, Impact MKII shooting .25 - 34gr JSBs threw a 700mm slug liner - fps is set to 910ish ,,, The scope is a FFP thats why I use Mills to measure.
Thank you!