Adjusting the reg and hammer spring is a tedious job. Especially taking the stock off to do both. So to make things a little easier, I made this little mod to the stock. It took about 15 seconds.
Now I can adjust the spring on the fly. I can also see the mark I put on the nut to tell if it is moving around or not.
One note, when you grind the stock, inside it is charcoal gray, not dark like the rest of the stock. So I just colored it in with a black felt tip marker. Works like a charm.
Crusher
Now I can adjust the spring on the fly. I can also see the mark I put on the nut to tell if it is moving around or not.
One note, when you grind the stock, inside it is charcoal gray, not dark like the rest of the stock. So I just colored it in with a black felt tip marker. Works like a charm.
Crusher