Gauging interest in high capacity bottle kit for Umarex Gauntlet

[DanielL]

Size is .45L, but at higher pressure it equates to over three times the shot capacity. The price wouldn't be much different from the 22 ci.in bottle but it doesn't work with the stock fore end.

Stupid question. Any concerns with the regulator handling the increase in tank pressure?

4,500 psi reg would be part of kit.

 

[Jospap]

Hi:

I'm thinking on replacing my Gauntlet’s 13CI bottle with a 4500 psi aluminum bottle with a regulator set at an output presure of 2100 psi. Would it be necessary to increase the hammer spring tension or replace the hammer with a heavier one to open the valve due to the higher pressure in the bottle?

regards

José Palma

 

[mackeral5]

I was on the same course but saved my energy back in July of 2019 when I talked with my friends at Umarex the Gauntlets being brought to the Pyramyd Air Cup and again at the EBR were going to be EXACTLY what my mind's eye envisioned. Yep, That's a 4500 PSI CF tank inside the Gaunties furniture.

As you can see, Its already a done deal, the vessel is the tank from the Hammer so once that goes full release I'm sure we can make something happen.



Hajimoto

Did anyone find a source for this specific bottle? Any long, skinny bottle like this or like Uragan's have?