• The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.

FX Maverick owners...how’s it shooting?

Got a 250 bar carbon bottle for my VP .30 cal. and did a little plinking today!

80 yards with a 7mph cross wind...full mag 13 shot groups off the hood...top group is 5 shots at the hole in the target...regs at 165/140 bar and shooting the FX 44.8s at 895fps! Thing is a hammer!!!⚒

James from Michigan 

20210114_141628.1610654995.jpg
20210114_140441.1610654996.jpg
20210114_140425.1610654996.jpg
20210114_140413.1610654997.jpg
20210114_140403.1610654998.jpg

 
Got a 250 bar carbon bottle for my VP .30 cal. and did a little plinking today!

80 yards with a 7mph cross wind...full mag 13 shot groups off the hood...top group is 5 shots at the hole in the target...regs at 165/140 bar and shooting the FX 44.8s at 895fps! Thing is a hammer!!!⚒

James from Michigan 

20210114_141628.1610654995.jpg
20210114_140441.1610654996.jpg
20210114_140425.1610654996.jpg
20210114_140413.1610654997.jpg
20210114_140403.1610654998.jpg

Hoo boy your Maverick shoots great and looks incredible with the Carbon fiber bottle! Nice photos.
 
I have a problem with my Maverick that the pellet probe is too small of a Dia. The Maverick that I have is a .22 Cal and from day one it had air blow by around the pellet probe. My probe dia. is 5.34mm. I can drop the probe into the barrel and it falls to the tapered part of the probe with out touching the O-ring. This happens in both my 500mm and 700mm barrel. Just to check on what it should be for a dia. I checked the dia. of my Impact MKII probe and it measured 5.54mm. FX is looking in to getting me a larger probe but this can be manufacturing mistake. I would advise anyone who owns the .22 Cal. to check their dia. This is leaving me with a bad shot string so I knew something was wrong. That is the only thing that I could find that was a problem so far.

Thanks Mike
 
Anyone have any insight on Scope Rings...I'm running the UTG PRO 30mm High Profile P.O.I Picatinny Rings and every shot is low and I don't have any more room to adjust the turret up anymore. .25 cal is pushing the JSB 25.39gr at 1050, the 29.5gr NSA slugs at 965 and the JSB 33.95gr at 945.

I had to add a shim to the back of my scope
 
Anyone have any insight on Scope Rings...I'm running the UTG PRO 30mm High Profile P.O.I Picatinny Rings and every shot is low and I don't have any more room to adjust the turret up anymore. .25 cal is pushing the JSB 25.39gr at 1050, the 29.5gr NSA slugs at 965 and the JSB 33.95gr at 945.


You need to get adjustable mounts, bunch of topics about it in scope section , I'm using Burris XTR

B