I checked it and the air is coming out on the big hole.."sniperlabyo"If the gauge -- tighten it down
Eddy"Eddy1840"
I checked it and the air is coming out on the big hole.."sniperlabyo"If the gauge -- tighten it down
Ok I'm waiting for the O rings, thank you"GQ"
Eddy"Eddy1840"
I checked it and the air is coming out on the big hole.."sniperlabyo"If the gauge -- tighten it down
Watch this video from Ernest
Did you tighten the screw ?"Eddy1840"I already remplaced the Orings but still leaking air, I tight the screw and gauge, but air come out on the screw when I shoot
It leaks here just when i take s shot."sniperlabyo"Let me get this straight ---->. You feel and hear a leak after you take a shot only ??? Or a constant leak???
what is this big hole you taking about??? The barrel where the pellet is loaded???
I did but didn't work, I don't want to touch anything now lol"GQ"
Did you tighten the screw ?"Eddy1840"I already remplaced the Orings but still leaking air, I tight the screw and gauge, but air come out on the screw when I shoot
I didn't put anything. Ernest are you to busy to tune this impact?"sniperlabyo"you put loctite if so let it cure overnight, or teflon tape on the set screw, you can remove it --- it doesn't hold pressure, only when fired.
the set screw is there to prevent the valve housing from moving to insure the transfer port holes on the housing and the action are properly lined up.
I'll try tomorrow. After seeing what you have done to other impacts, I would like you to tune mine.."sniperlabyo"if you have teflon tape it's a fast fix, no tuning needed