Does a Guppy valve fit this tank?

[cilami]

http://www.ebay.com/itm/231312000514?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

TIA,

Miguel

 

[T3PRanch]

I "think" the Guppy uses a 5/8"-18 valve while the Tank on e-bay you linked uses a 7/8"-14 valve.

Thurmond

 

[Daisy188]

The guppy valve is smaller. I asked joe B. That is a nice draeger. I'm looking for a tank, too. Good luck!

 

[cilami]

Thanks for the replies! I'll keep looking for a good deal with a bigger tank/valve.

 

[fe7565]

$700 is ridiculous price for a setup IMO. If that's a SCBA tank you may be able to use a CGA 347 adapter and go from there. Make sure you add a bleed valve somewhere in the line. All parts rated minimum 5,500psi working pressure.


http://www.northshorecompressor.com/products/CGA-347-Hand-tight-nut.html

http://www.northshorecompressor.com/products/CGA-347-Hand-tight-nut-and-nipple.html



Here is the entire setup, may skip some of the parts:

http://www.northshorecompressor.com/products/SCBA-to-Paintball-Rigid-Fill-Assembly.html

http://www.northshorecompressor.com/products/SCBA-to-Paintball-Fill-Assembly.html

Here is mine...

 

[fe7565]

Double post****

 

[cilami]

Thanks for the info and links!