Delta Wolf help needed

[scoeri]

i have had my delta wolf .30 caliber for 2 months now. have put 4 tins of pellets thru it with zero problems. now all of a sudden problems. i have two 8 shot flip open magazines. i'll call them "A" & "B". mag A has zero problems will fire every time. mag B will fail to fire 2 or 3 times per 8 shots. when B fails to fire, i will open the bolt & remove the magazine. close the bolt with no magazine & it will fire the loaded pellet. have tried it with shot counter on & off. no difference. i am needing help on this one.

Thanks Shooters

Scott in Wisconsin 

 

[trlrman]

I had a similar problem but think it is the micro switch as I single load . I loosened the trigger and slid it forward then adjust the the Allen head in that was under it ,slid the trigger back and have had no problems since. This is the screw at the very rear , a little turn goes a long way so don't over do it. 

 

[LFCM]

Have you checked whether the magazine rotates when you reload? Mine, also a 30 cal DW occasionally presents similar problems. Now, upon firing I verify for mag rotation and if it did not rotate, I do it manually; no big deal. AOA is sending a replacement magazine.

Hope this helps,

LFCM

 

[trlrman]

Ok I thought it sounded like a dead trigger issue not a magazine issue as the OP stated he pulled the magazine and fired the loaded pellet ?

 

[scoeri]

i sent my delta wolf off to AOA. came back to me working perfect. service department Shane said they tweaked something in the cocking lever linkage & updated the software. big thank you AOA. one concern tho, came back with a 30 shot chrono string print out with an ES of 30 FPS. should i worry?

Scott in Wisconsin

 

[Arzrover]

I wouldn't. it's likely tested in Factory mode so first couple of shots would be different. In Advanced Mode , you should be able to tune your velocity to pretty small ES.

Glad they fixed you up.

Bob