Dear "industry"...

[iAMzehTOASTY1]

So I dug I to the fishing gear.
Found some 40lb monofilament.
Did some tests and found a good substitute and no cost to me(already had everything).
Cut a chunk of line 3 times the barrel length.
Find the middle.
Tie in patches to fit bore( was using 1 for .177 and 2 for .22)
Run line through until patch contacts barrel.
Slowly introduce(pull) patch flush with barrel.
Add oil to patch.
Use the end of the lines to run the patch to and fro inside the barrel(scrub it)
Remove and replace patches.
Repeat until clean.

 

[TN_Yankee]

Two links telling you why you should NOT use Scotch-Brite in your bore:

https://www.airgunnation.com/thread...no-moderator-lead-dust-collector-ldc.1158889/

https://www.pyramydair.com/blog/2006/01/cleaning-airgun-barrels-the-stuff-you-need-to-know/

 

[Hateful McNasty]

Two links telling you why you should NOT use Scotch-Brite in your bore:

https://www.airgunnation.com/thread...no-moderator-lead-dust-collector-ldc.1158889/

https://www.pyramydair.com/blog/2006/01/cleaning-airgun-barrels-the-stuff-you-need-to-know/

I guess it's a do as you feels best for you.

Im not stopping . Works great , best thing ever .. been using it for some time now and yet to see any bad affects . My stuff shoots pretty darn good . I guess some misuse things and f it up somehow. You don't think that gun cleaning patch dont leave fibers as well ? If your scared just dont do it , right?

 

[Nattboy]

Earlier today I was going through a box where I keep old tee shirts that I use for cleaning stuff. I came across an old nylon ribbed dress sock. Thought I'd cut a piece, spray it good with Ballistol and pull through the barrel. I have a new pull through on order. Should be delivered tomorrow. I wonder how that will work.