I have a Fx Royale (regulated at 140bar with cf bottle) that i bought in Sweden (sub 10j) and with it a full power kit that includes the new power adjuster (new transfer ports) and the new open valve support (the sub 10j includes a closed one that don't let the valve to open all the way)
After the two things are installed, i'm getting 880fps with 18.1gr, it would be perfect if the air consumption wouldn't be horrible.
I'm getting 60 regulated shots from a 230bar fill with a 480cc bottle.
I've asked Hurricane but he couldn't give me a solution, and i was not able to find it by my own. I wanna add the hst is not near to be maxed out, i've chrono it and found the perfect spot for the hst before it starts messing up with the ES and the velocity goes down.
As far as i know there are no differences between my rifle and a factory full power version, exept the valve spring is 20mm instead of 15mm, but that should cause the opposite making more resistance in the valve wich make it close quicker, so there is no reason to waste air just for that. I've tried a 15mm valve spring anyways but i was not able to see any difference so i kept the 20mm one. I will be extremly grateful if it can be solved because fillig 480cc with a handpump with this frequency is exhausting me
Regards, Manuel
After the two things are installed, i'm getting 880fps with 18.1gr, it would be perfect if the air consumption wouldn't be horrible.
I'm getting 60 regulated shots from a 230bar fill with a 480cc bottle.
I've asked Hurricane but he couldn't give me a solution, and i was not able to find it by my own. I wanna add the hst is not near to be maxed out, i've chrono it and found the perfect spot for the hst before it starts messing up with the ES and the velocity goes down.
As far as i know there are no differences between my rifle and a factory full power version, exept the valve spring is 20mm instead of 15mm, but that should cause the opposite making more resistance in the valve wich make it close quicker, so there is no reason to waste air just for that. I've tried a 15mm valve spring anyways but i was not able to see any difference so i kept the 20mm one. I will be extremly grateful if it can be solved because fillig 480cc with a handpump with this frequency is exhausting me
Regards, Manuel