My carbon fiber sleeve now stuck in the housing.
I try all I can do but can’t move it at all.
Anyone have idea to help me out?
I try all I can do but can’t move it at all.
Anyone have idea to help me out?
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Anyone have the problem with impact cf sleeve?
- Thread starter BlackTulip
- Start date
I tried pull or tap from inside. Nothing work.
if like that I need to order a new sleeve which is too sad.
if like that I need to order a new sleeve which is too sad.
Upvote 0
There is slight differences in some sleeves ID, we're you trying to slide it in first time? What I would do would be put the sleeve in a padded vise and put the CF in a drill chuck and try to spin it out. I was opening the ID of a CF tube with a dowel and sandpaper. It got bound up really good and had to beat the wood out of there was not easy.
A welding glove folded over is a good way to pad a vise. The rough leather gives good grabbing capability while not messing with the finish. Obviously try to clamp the area the CF is not inside of. Good luck.
A welding glove folded over is a good way to pad a vise. The rough leather gives good grabbing capability while not messing with the finish. Obviously try to clamp the area the CF is not inside of. Good luck.
Upvote 0
Mine fit really tight I lubed the outside just a little and used all my weight to get one in then had to tap it down last little bit so the liner nut would go
Upvote 0
Yes I tried slide it in first time and it sucked right away.
Thx a lot. I will try your way.
Thx a lot. I will try your way.
Upvote 0