Hello everyone! Finally created an account after reading forever. You guys have been a great resource for me!
I'm hoping someone has some insight into what's happening to my Uragan King in .30 cal. I needed to replace the breech O-ring, so per the manual before working on it, I degassed the gun using the small screw under the trigger guard. I turned it slowly and just let the air bleed out over the course of 15-20 minutes. I then removed the barrel, replaced the O-ring, reassembled and attempted to charge it up using my compressor.
And it will not build any pressure. I've tightened the bleed screw as much as I feel is safe, changed the fill probe O-rings, checked the compressor on another gun, and nothing.
Do I need to put some kind of sealing agent on the bleed screw?
Any help is greatly appreciated, thank you!!
I'm hoping someone has some insight into what's happening to my Uragan King in .30 cal. I needed to replace the breech O-ring, so per the manual before working on it, I degassed the gun using the small screw under the trigger guard. I turned it slowly and just let the air bleed out over the course of 15-20 minutes. I then removed the barrel, replaced the O-ring, reassembled and attempted to charge it up using my compressor.
And it will not build any pressure. I've tightened the bleed screw as much as I feel is safe, changed the fill probe O-rings, checked the compressor on another gun, and nothing.
Do I need to put some kind of sealing agent on the bleed screw?
Any help is greatly appreciated, thank you!!