Search results for query: *

I'm trying to get my hands on a ldc for my shinsung 202 fire 9mm.

+1!

That's understandable, you're pretty safe with .187 any bigger then that is were it gets sketchy. Iv opened the ports on one of my .25 marauders to .200 and the side wall was crazy thin and I had to modify my bolt to get the pellet skirt all the way passed the port hole.

You can always drill out the stock valve later on if you want more power but don't want to spend a bunch of money. It's not as good as a Hill valve but pretty close and a lot cheaper. P.M. me if you want the spec. On it. Iv made a couple now with just a drill and drill bits. Did you end up...

You mite also want to check your barrel crown uniformity and overall barrel for burs. I would expect tighter groups then that at only 25 yards. As check and make sure your not clipping your moderator to.

http://www.airgunnation.com/topic/lapping-and-polishing-barrels/ Here is a great write-up on lapping and polishing from ajshoots. Do not try and lap your barrel! But you won't hurt anything by polishing it. Just be careful with your barrel crown when you do it. And yes a regulator does the...

Hi Jay It would be a depinger or a regulator because a reg works as a depinger. You could always polish the barrel, that should help a little. What are you using for bullets/pellets and have you tried others?

Have you drilled out your air stipper yet?

2323.23

666.66

I have a .250 acp TJ barrel that I put on my Armada to make it a bullet shooter and every time I shoot paper I'm amazed at how accurate it is!!! Idk if it's the same for the bigger cals. But it does seem all his barrels run on the tight side. Nothing bad about it, just something good to know.

I've done a lot of work on the Marauder platform, lol and own to many. Idk about over 1100 fps but I think getting close to 1100fps is doable with that set up plus a aftermarket valve. But, if you weren't using a balanced valve and stayed with the standard knock open valve you would have a hard...

That is a good point! If you have a bleed off valve that is slow you have a good chance of losing air do to the design of the Marauder one way fill valve.

The one way filling valve is slowly going bad on you.

Don't expect much over 850 fps. When my armada was stock and maxed out. I could only get 870fps with jab 25 gr.

+1To that!

1222.22

Great guy to deal with, made everything go smooth and easy!

Just barely hand tight, it locks in place with the pressure when you fill it.

I'm in Provo, I to work a lot but would be able to get away with some notice.