Search results for query: *

Hello fromm Greece. I have the impact mk1 and upgrade it to mk2 with the following settings- Barrel 48mm smooth twist regulator at 120 bars power wheel to 1 (18.16mm) valve on 2,5 bars avg velocity 935 fps pellets jsb 18.13 grains external plenum 50cc upgrade plenum of mk2 That is the...

thanks mate

Hi guys My scope is a hawke sidewinder 6,5*20 42 half mil dot I try to find the reticle in that program but still looking..... Try the mil dot bar 0,5 mil,millet from the program witch is same with my reticle give the parameters of my scope and airgun but nothing. Any advise? Thanks

Hello guys I shoot my impact .22 with AA pellets 18.3 grains and they are perfect. My settings are Avg velocity 902 fps Power on 2 (17,60 mm) Valve 3 Regulator 140 bars I took 90 shoots per fill from 250 to 150 bars.


How many shoots pre fiil do you getfrom 250 to 150 bars? With same velocity and same setting i get 90 shoots pre fill. 


Hello Esting I just took a second hqnd impact in .22 high power. The regulator was set at 125 bars but after some adjustments to power and valve i couldn't get more than 880 fps. So i adjust the regulator at 140 bars valve on 3 and power on 2 ( 17,8 mm) Now i have an avg speed of 905 fps and...

Likkitysplyt. ....Thank you for your help i will try to do all that . Tell me please what is your consistent (es) between 18 shots and also if you fill the gun at 250 bar when you shoot the first magazine (18 shoots ) what is the pressure in you gauge then ? My settings are -regulator 140 bars...

What about the shoots pre fill?How many shoots do you have? And what about the valve adjuster? The adjustments on the hammer are in , max adjust? Thanks for the information

Normally when you clean the barrel for the first 20-30 shots poi is changing, and normally poi don't change even when you take your barrel out. 

You have to replace the inside oring ot the bottle normally. Check again the diagram of trouble shooting. 

Hello guys. I bought a new impact .22 high power, before two days. The regulator was set from the factory on 125 bars. In that pressure i couldn't get the velocity that i would like to shoot my gun (900fps avg), so i set him ( after adjusting hammer and valve adjusters) on 140 bars. In that...

13