Search results for query: *

Did you try & load a couple of pellets into the barrel & push the cocking lever & pin probe against the pellets gently to try & seal the transfer port as you fill the gun? Please keep in mind that the safety is on & the barrel is pointed in a safe direction as you try & do this.

Use a Brass piston in the first Reg set at 180 like in a Huma reg?

Can use Plumbers tape on the top of the capsule.

I tried adding an O-ring where the plenum meets the action but the leak has not stopped.

Did you 'close the amp at the bottle adapter' by decreasing the Regulator pressure?

My Dream tac has a huge leak at the power plenum to action joint even though i have replaced every single O Ring in the gun. I also find that the power plenum & Reg housing when tightened fully do not sit straight ie the pressure gauge is not parallel to the Reg gauge really at my wits end now.

My Dream tac Compact that i bought in 2021 has leaked out all its air & i cannot fix it even after replacing the Valve pin & seat including the O rings. Today i found that the Valve pin that Bagnell & Kirkwood sent me has a smaller dia delrin poppet than my factory Valve pin☹️

Did you open the Valve knob out to 6 lines to see if that increases the speed becoz my 25 Impact the factory shroud comes in the way & i cannot move the valve knob more than 4 and a half lines?