Search results for query: *

  1. Trucker3573

    AEA Centerpunch 30, 50.5 gr, 950 fps

    Where did you find the aea 50 gr in stock ? I’ve watched many videos where it seems like the aea cannot be shot too fast. Maintain stability as hard as guys can push them.
  2. Trucker3573

    AEA .30 50gr speed question

    Hmm…I suspect there is something else going on if you aren’t having luck with the 44.75 out of an fx liner. They should be dead nuts accurate.
  3. Trucker3573

    Airgun Technologies Vulcan 3 25 500 mm ?

    Hmmm…my .30 that is newer shoots pellets well. Hope the .25 does. Anyone have a newer one ?
  4. Trucker3573

    AEA AEA SF .30 another "talk me out of"

    Yes but if you watch enough videos he has many many problems.
  5. Trucker3573

    Airgun Technologies Vulcan 3 25 500 mm ?

    Thank you for the link 👍
  6. Trucker3573

    FX fx dreamline tactical rear adjustment knob question

    Looks like a newer version of it was put on your gun. Works in exactly the same way as the other one you mention this one just has “more stops” along the tightening of the hammer spring journey. 1 will be the least amount of spring pre load on the hammer and 23 the most.
  7. Trucker3573

    Airgun Technologies Vulcan 3 25 500 mm ?

    Hello this might be a bit specific but figured I would give it a shot. Does anyone have a Vulcan 3 .25 compact that sauced it up just a bit to shoot 34 gr pellets ?? If so do they shoot the heavy 25 cal pellets well ? Thanks.
  8. Trucker3573

    N/A Rifle set up to shoot 2 different pellets/slugs

    Actually with 15.89 going a bit over 900 the 18.1 should just about fall in place by themselves. Problem would arise when you try to get 18.1 and 25.39 on one tune. Those two projectiles have a near 100 fps spread. That is hard to accomplish. The only gun that I’ve ever owned that did such a...
  9. Trucker3573

    AEA AEA SF .30 another "talk me out of"

    Easy one…..it’s an aea. Macabeespeed is a great channel to watch to catch the ratio of AEA wonder to peril.
  10. Trucker3573

    Airgun Technologies Uragan 2 and the assisted valve

    Ahh ok yeah that makes sense
  11. Trucker3573

    FX FX M4 800mm

    Is it a full power version gun ? I don’t see a location in your profile so why I ask. No idea about the rifling. I am assuming by the settings you listed 3 must refer to the micro ??? If so 3 is way too high for the reg pressure that will required for 25.39 out of an 800 mm barrel. You will...
  12. Trucker3573

    MASSIVE BlackHound discount!

    Oops I posted this as well. Didn’t see your thread Jacespace. Yeah I have 2 genesis 6-24. Won’t find a better scope for 200 bucks.
  13. Trucker3573

    Definitely watch this!

    Definitely a must ! Great glass and a no brainer at these prices.
  14. Trucker3573

    Airgun Technologies Uragan 2 and the assisted valve

    What is the allure of the Uragan over the Vulcan. Vulcan just seems the more solid choice to me. Easier tear down and super versatile in tuning options.
  15. Trucker3573

    Tuning New to tuning

    The hades pellets in my experience are a little more speed sensitive depending on your barrel than the jsb 25.39. I’ve never had a 700 mm fx liner but my 600mm liner didn’t like them above 900. I usually kept them in mid 870-880’s. Basically tuned my Maverick for 900 fps with 25.39 and that...
  16. Trucker3573

    FX Need Help Form You FX Royale Guys

    I think an easier fix would be to find a moderator that doesn’t clip as that I assume is probably what is going on. Buck rail has mods that work really well and are cheap, like 40 bucks. Would be a cheap place to start. Get one in .30 cal so it is a bit over sized. I have the buck rail mod in...
  17. Trucker3573

    Air Venturi Opinions on a more accurate alternative to the AvengeX

    I am assuming you have a tube avenge x? Have you tried just removing the barrel band ? Like firewalker said about the air cylinder. I have read people determining on the original avenger that the flex and relaxing of the air tube from a full fill toward set regulator pressure ever so...
  18. Trucker3573

    N/A Choosing a .30 cal

    I’m in on it as long as it has hammer pre load adjustment so you can change it to match reg pressure. I believe it does have it. I can’t imagine they wouldn’t put that feature in it. Even AEA has put it in the new LB challenger pro models.
  19. Trucker3573

    N/A Choosing a .30 cal

    Supposed to be a new gun coming down the pipe in the next few months. The Karma EQ. Looks pretty sweet for 900. I am super interested. Bit over 800 but there aren’t many .30 budget options. This looks like it would be good bang for the buck.
  20. Trucker3573

    Name a decent entry level airgun in the $250- $400 airgun price range. 25 to .30 caliber

    This…I was slightly hesitant when they first posted these as I believe they are discontinued but for 200 and some dollars I don’t think the risk is that great. Orings can always be found and that is the most likely culprit you find behind pcp problems.