Search results for query: *

I have an ultra picky .22cal LW Poly barrel in my RAW. The only pellet/speed combo I've found to work is shooting JSB RDM Deep Pellets at about 930 - 950FPS. After trying various reg pressures, I found that setting the reg at about 155 Bar allows a maximum speed of 965fps. 97% of this is...

Up for sale are misc. Warne, Weaver, UTG, mounts and rings, along with some other related items. The 2 USA-made items, the Warne mount and the Weaver rings are in like new-condition. Everything else ranges from good - like-new condition. Everything is for sale for $150 shipped via USPS...

Up for sale are (30) Tins JSB Monster 25.4gr Redesigned and (6) Tins JSB Monster 25.4gr Redesigned Deep. These cost about $400 New from Pyramyd Air. I'm selling the lot for half that - $200. Local pickup in Sacramento area only. Thanks.

I bought a reg tester from HUMA that screws into the bottom of the block of HM1000 rifles. The issue is that the brass tip contacts the regulator before the part can be screwed in all the way. (This gauge DOES work with HUMA regs becasue they are shorter than the RAW reg.) Is there some type...

Up for sale is a RAW HM1000x full-length .177cal Poly Barrel w/ (2) Moderators. Martin's original moderator is included, as well as a shorter custom moderator that I had machined. This barrel is very accurate. I shot JSB Original Monsters at 20fpe and could get 50yd groups of 1/2". It's an...

I bought a .22cal RAW HM1000x about 6 months ago. Martin said it was tuned to shoot JSB 18gr at speeds around 970-980 fps. However, I found the rifle wasn't accurate as received. Also, I bought it with 2 barrels - a 20" and a 22". Over the past 6 months, I've tried various Air Arms, H&N...

The UTG 3-12x44 finally bit the dust on my HW50. I'm looking for some suggestions for a new, fairly compact FT scope for this rig. This scope actually ranged pretty well up until about 40 yards. I've tried the newer UTG 4-16x44 scopes, as well as a Hawke AIRMAX 30 SF COMPACT 6-24X50. I found...

I mistakenly left the bottle off a RAW without degassing the plenum. It sat in this state for about a week. When I reattached the bottle, all seemed well and the pressue gauge popped right back up to the same pressure as when I removed the bottle. But the next day, the gauge read totally...

I've been wanting to lighten up my field target rig so I've been setting up a chassis stock for the RAW. Although the wood stock feels super comfortable, it's pretty heavy. I find myself struggling with the offhand shots because of the weight. The chassis stock lightened the rifle by nearly a...

delete

Up for sale is a 177cal Diana Skyhawk with HUMA Regulator. It also includes an Athlon Ares BTR Gen II 2.5-15x50 Scope, Scopewerks Sidewheel (with dope markings), Monstrum flip-up caps, and FX adjustable rings. (The Vortex Bubble level is NOT included.) The Donny FL Tanto is also included. The...

Up for sale is a .22cal Diana Skyhawk with HUMA Regulator. It has a custom 19" CZ barrel machined by Motorhead, along with a custom shroud. It also has upgraded trigger linkage. The walnut stock has 3 coats of Royal London Oil applied. It's in superb condition with no visible dings that I...

Athlon finally came out with their line of airgun scopes - the HERAS SPR line: https://athlonoptics.com/product-category/rifle-scopes/heras-spr/ This is the one that I am interested in for FT: https://athlonoptics.com/product/heras-spr-6-24x56-aplr7-sfp-ir-moa/ There looks to be a nice...

Is it true if the plenum pressure drops below the regulator set point, it will bleed out the remaining pressure WITHOUT HAVING TO DRY FIRE THE RIFLE? Also, does anyone know what size o-ring fits over the bottom plug in the receiver? Thanks!

Can anyone recommend an air stripper threaded 1/2"x20? Thanks!

So, I'm having a couple issues trying to up my reg pressure. Twice, I've turned the nut 1/4 turn CW while holding the inner hex key stationary. The reg pressure hasn't changed. It's stuck at around 90bar. Also, when I pull the bottle, the reg is dumping it's air too. Is there a seal that's...

I've probably removed the bottle from my RAW HM1000X about 3 or 4 times in total. I'm about to adjust the tune and will probably need to remove and replace the bottle several times. Would it be a good idea to lube the threads with moly or Krytox grease? I want to avoid any galling when...

Can anyone confirm if the BEST Fittings Theoben Rapid 7 Reg Tester fits Current RAW Regulators? Thanks!

Well, today was the last FT match for the year for the Sacramento Valley Field Target Club. Weather was forecast to be on the cool side and WINDY! The wise Match Director set a slightly easier course to avoid having us run home crying. Many hands make light work, and we made quick work of...

How are you guys protecting your small 100cu in tanks? I've tried to find a padded sleeve to fit just over the tank, but I can't seem to find one. I'd prefer a little more protection than the vinyl netting that is typically used. Thanks.