Search results for query: *

Well with some valve work and a heavier hammer 165 bar pushing 1035-1042 for a magazine full of zan 54 grain is all I've tested threw the Chrono Man the back stop smack is loud

Well I maxed out my 22 cal 700mm drs classic with 34 gr pellets 970s my red wolf can do that I may have to look into making a brass hammer weight . Any one else shooting drs classic 700 that speed sound right I was hoping 34 gr slug would do that

I'm a bit confused I wanted to get a drs 600 mm couldn't find in 22 or 25 I then ran across a 22 cal 700 mm with synthetic stock classic I thought so I'm curious what plenum would come on it 12 cc classic or a larger plenum?

Well a friend and I just cleaned out 2 free stall barns using my bottle notos at 11 ft lbs and my mrod pistol rifle I have a 20 in marauder barrel 185 that we counted and we used just shy of 250 pellets all In all it was a pretty good day and a new record for us in a morning

Well I went to put short throw lever on my daystate redwolf in a chassis I used my left hand before for cocking so I could stay on the scope and trigger if need be also seems like I can hook it with right thumb and cock it that way as well I don't just wanted to try something different and I...

Looking to buy .217 sizing die for pellets/slugs either for a reloading press or another style Thanks Mark

I'm selling this impact for a friend so when some decides to buy it or when it sells I'll have the person mail him the check and when it clears it will ship M3 has tungsten hammer saber tactical front reg delete upgraded brass piston in reg with peek upgraded it to power block and installed a...

Wts 30 cal pellet gauge both are SPF

Well my arsenal mold for 34 gr 22 slug is on the way made to .218

Well I found a put together a bottle notos and the valve block came with a adjustable reg I was wanting to detune the notos to about 10 ftlbs for pigeons in the barn farthest shot would probably be 30 yards but mostly about 10 to 15 yards area think 10 ftlbs is still a bit much Trying not to...

He bought a new daystate delta wolf about 3 months ago hasn't used it because the regulator kept switching out and saying low pressure and it wasn't right from day one I called and asked about it in service thinking it could be a break in issue well he ended up putting 2 tins threw it in that...

I emailed sabre tactical to see if they were going to make a chassis for the redwolf. I got a response back of wow for the price of the PRS chassis and then said I'll talk to the guys and see if the want to make one So I'm hoping they make one which would be more affordable

I have two scba tanks and I screwed up the size of the thread and ordered the wrong size valves 50.00 each shipped thread size is 7/8 on the valves PayPal fandf or pay fee

Any reason why I couldn't make the throat in the valve .300 and take it a tad deeper then round out the bottom of the transfer port part in the valve and make a custom poppet to .345 ish and add weight to the hammer I have a spare valve and I want to be able shoot 34 gr 22 cal faster and 34...

Ok so my friend that shoots a lot he retired and goes out shooting all the time he has a panthera 22 which started leaking out of the front of the valve the oring that seals it looked trashed and I replaced it with a viton oring it was the only orings that I had that fit so I put it in now his...

I got a couple of 700 bottles and want to change the oring but I don't seem to have the correct size on hand does anyone have correct size Thanks for any help

I know this thread has been on here a lot m3 slow reg refresh what fixed most of them restacking washers in a different configuration I have about 25 to 30 bar difference between them and 2 and reg is taking 30 seconds to refresh

From what I can tell air is coming out around the front of the valve stem I have yet to dive into a panthera so I'm wondering if if is just a oring or a bent valve I'm leaning towards the valve being bent because it's the front valve stem leaking

Looking for 700 cc bottle m18 threads alsafe or similar brand I have one on order but it's taking forever let me if you got one for sale alsafe bottle is 150 bucks so something in that price or less depending on the shape of it let me know thanks

Does any one know the thread size for the bottle the red wolf uses thinking about swapping to a longer one since the room is there and wouldn't add a ton of more weight. 18x1.5 was my guess I haven't tried to remove the bottle yet either so I'm not sure