Search results for query: *

That looks pretty amazing! How durable is that finish?

I don't remember what my reg was set at from the factory, but I do recalll it seemed a bit high. I backed it off to either 115 or 125. It's shooting the 16 grain AA pellets at 965 FPS and the 18 grain AA pellets at 909 FPS. I have the 600mm barrel model.

What pellets/slugs are you shooting and what's your FPS with it set to 2%?

About that, reg pressure is around 120 if I remember correctly. I'll be able to verify that once I get the o-ring for the plenum seal installed and get everything aired back up. With the second gauge, I should be able to tell if there is any significant reg creep after it sits over night.

If so, what is the fix?

The Raptor is made here in the US by a small shop run by a machinist. Early on, they had some issues, but those have pretty much been ironed out. For you being overseas, my main concern would be the availability of parts if needed. You may want to check witht he vendor offering the Raptor and...

They say yes, I guess I'll see when I get the replacement o-ring for the plenum!

Utah Airguns

When I first got my DRS it took 4-5 shots before it hit full velocity. I was sent a new regulator and since installing it, only the first shot is low and not by as much as they were before. You may need to replace your regulator. I have had good luck with the Huma Air regulators, I have them...

Yep, I'll have to give that a try. I kinda took the DRS out of commission today. I got the SHP Plenum for it and thought I had bleed both the air tank and plenum, but the plenum still had pressure in it and when I loosened the screws holding it in place, it blew out the o-ring! I have some...

Thank you for the replies. The gun stays inside, I shoot out the back window of the house from air conditioned comfort, so I don't feel it's got to do with temperature. I guess it's time to bring out all my old, unused and/or cheap ammo and give that new regulator a really good work out and...

My DRS is experiencing a low velocity first shot after it sits awhile. Any idea what could be causing this? I have already replaced the AMP Regulator because it was much worse, the first 3-4 shots were considerably lower than the rest after sitting awhile. It's just the first shot now, but...

You should have some spare burst discs in the packet of spare parts that came with your compressor. It is a 1 minute job to replace it! If you need some or want spares on hand, and GX Pump doesn't have them, you can order Burst Discs from Amazon also, just measure the one that's in there so...

Check out this YT Channel, I believe Jason works for GX Pump: https://www.youtube.com/@songjason3205/videos There is also a FB Group: https://www.facebook.com/groups/731183484792540 If it is still under warranty, I would contact GX Pump for help and parts: [email protected] And, if all...

Sounds like you may have a leak somewhere. I had two different Hatsan Sparks, both failed! They are slow and not very reliable. If you are looking for a nice, inexpensive compressor, I'd recommend the GX Pump compressors. They are much quieter and are proving to be very reliable...

Having access to the equipment is awesome, having the skills to use them is priceless! Unfortunately, I have neither access or skills! :oops:

And I'm sure it was much cheaper than the additional $150+ they want for the CS4-I! Great job!

I think it depends on what you are getting and who it's being offered by... I have purchased several refurbished Hatsan airguns, some direct from Hatsan, others through Field Supply. Some have had problems, others have been problem free. In all cases, Hatsan was pretty good about either...

Exactly! The only difference is the location of the power supply. Personally I prefer the CS4 because it's a bit smaller and lighter. If I'm going to take it to the field and run it from my truck battery, I don't need the power supply! I have the PS for my CS4 mounted under my work bench so...

LOL! Me either! I just did a search, is he the guy hunting turkeys dressed like a turkey?