Recent content by schoofsbock

Aaargh and I just bought a bounch of H&N for my Huben…. However, mine is the Gen 3 with chocked Lothar barell, perhaps H&N is working better with this ? I`ve just not tested due to missing time.

No, I`ve still 5,5 mm hole on VS (Valve stem ?)

Yes, it seems you will gain nothing with dual TP and modified probe. I also can not recommend this HUMA TP. Perhaps HUMA should mention, that you will gain only some FPS with much more modifications an your gun ...

Gained 0 FPS more than before mith this HUMA dual Transfer port and modified pin probe. FX Impact Gen 1 in 0,3 caliber and 700 mm Barrel 😥

Yesterday I assembled (w/o Loctite, hope will work …) opened the probe and adjusted to the dual transferport. Then I started to shoot with 2 different chronys and I measured THE SAME FPS LIKE BEFORE.... ??? WTF ...

Aahhh, very good, thank you.

I just adapted my old 500mm 0,22 smooth Twist x liner to my SPA M10 ….Have to check next time how it works ...

Hi all,Ive also ordered These dual ports in 0.22 and 0.30. However, Im not able to screw out this brass part from the original FX Barrel. The original brass part is sitting like welded in the Barrel … impossible to screw out .. Is it secured with Loctite ?

Yesyes pfletschness and after the fotosession you shot the eagle down with the Daystate … Wuhahahaaann …(yyaaarrgh, it’s a corona problem)

Yes 

Are you bored ?

Ahe, thanks to bucketboy for his idea

H-h-h-hot ... Seems I`ve to restart my thinkering project. Hope to get some LW asap ...

+33 fps with this pin mod ???? Neeeeeeeveeeerrrr ...

bb, sorry, I forgot to mention that speaking about Straton Monsters. These are 25.89 gr. For me this is the heaviest straton . However, in every gun I tried i got bad results. I will give a try with Impact and set to low power, thanks.