Recent content by ortzsergio

i change the regulator in my fx royale 400 now i used a huma air 140 bar , after i make that change star leak air after check all i discover is the Delrin seal washer i used a liquid teflon and now is ok

If u still need the size of the orings this is the sizes O-ring sizes for regulator is 2.9X1.78 (1) 6.07X1.78 (1) 7.66X1.78 (1) 11.6X2.4 (2)

Hi i have a problem whitn my fx royale regulator so i order a new orings to arizona airguns but need the video or diagram to replace if some body have please send thanks

the correct hole u need to make is the one next to the manometer, because the one hole in the manometer is o ready maked “Strever”i installed a regulator in mine the vent hole is next to the gauge needs to be drilled out the vent hole is the one need to drill out 

i check the instruccion in the fx web to install and is wrong chapter 3 1. Remove the gun from the stock 2. Remove the airtube/bottle and the valve bracket(1) and the plastic gasket(2) which is located 10mm inside of the valve bracket(1). 3. Remove the manometer, you will see a 2mm diameter...

Hi my fx royale is liking air and i ask arizona airguns and said is downty seal can some body send me a pic to that place please

Thanks for the information about size of the orings can u tall me who make that regulator please thanks 11,6×2,4 NBR 70

hi need the diagrams for the Bobcat complete please send me that [email protected] include the FILLBROBE TYPE MKII please thanks