Recent content by John1966

Today tested my Pallas Hamburg Maxi Synthetic 5.5 Fac. I've had it completely taken apart, everything cleaned and polished All the ports drilled out to 4.5mm. Hammerspring all the way in until i just had enough to cock it. These are the results.

I just got a pallas Hamburg Maxi Synthetic 5.5 Fac, has it the better Valve valve in it? Anyway i did my first test from 20 meters /yards and have hole in hole.

This is what I was told by Huma air when I had ordered one for my P35 6.35 but had forgotten what it was for when I ordered one for my m25 7.62 👍

Is this also the reason that when I shoot that I hear the air pass through the regulator?

Oké thanks very much mine is set at 150 bar and put the little screw in

What's the tiny screw for at the top of the Huma regulator, i mean the very tiny screw that's goes into the screw where you set your regulator with?

Thanks, indeed they have to settle first it was the same in my snowpeak p35

Today finally put the Huma-air regulator in my snowpeak m25 7.62 Looks a lot better than before with the broken Chinese regulator. This was the first test with the Huma-air regulator it still has to set itself. Notes Bull : 50.46 gr jsb Weather: 7.9°C 1.8 m/s overcast clouds 1021hPa/mbar...

Today finally put the Huma-air regulator in my snowpeak m25 7.62 Looks a lot better than before with the broken Chinese regulator. This was the first test with the Huma-air regulator it still has to set itself. Notes Bull : 50.46 gr jsb Weather: 7.9°C 1.8 m/s overcast clouds 1021hPa/mbar...

Anyhow, when you sell things, you always make sure that the things you have sold are delivered to your customer in perfect condition, otherwise you have to close your shop and do something else. I am self-employed myself and my first priority is my customer.

Yes i now but this is to much, it's not because it's cheap i should be bothered with this poop

Indeed never buy anything there again at krale it's not the first time

It looks like I've found the problem. The regulator was just loose in the air tube and full of iron shavings and green gunk. I bought the rifle new on January 22, 2024 from Krale. I have now ordered a new Huma air regulator today. Look at the pictures

Someone who knows what's going wrong, this is the first time I've tested my snowpeak m25 with the FX Chronograph. The figures seem very strange 🧐 to me. Notes Bullet : 50.46 gr snowpeak Weather: 6.9°C 2.7 m/s overcast clouds 986hPa/mbar 29.12inHg 96% Shot count: 19 Low: 46.6 Hi: 89.9 Avg: 69.3...

Someone who knows what's going wrong, this is the first time I've tested my snowpeak m25 with the FX Chronograph. The figures seem very strange 🧐 to me. Notes Bullet : 50.46 gr snowpeak Weather: 6.9°C 2.7 m/s overcast clouds 986hPa/mbar 29.12inHg 96% Shot count: 19 Low: 46.6 Hi: 89.9 Avg...