Sorry Chuck. Way overkill and likely to cause perm. damage. Buy bottle of nail polish in a color to match your toe nails. Use brush to place small drop on nut/threads, this will crack loose easily when dry.
My .25 Renegade HP with an external regulator set at 190 bar gets results similar to the factor test sheet. Gonna get a Huma to improve shot count but expect perfromance to go down. Let us know how it works out
I believe that you need an adjustable butt plate on a bullpup to make it work for YOU. Why they are not included on $1000+guns is crazy and indicates a lack of knowledge of ergonomics by the manufacturers. :/
Seems to be a design problem. I Need to get some Viton o rings and try them. I think they are 6 x 1.5 -70. Is this correct for the .25 ? Anybody!!! And where from?
Have change o ring every 50 to 100 shots. Using external reg at 190 bar. Bad o rings look good with a 10x loupe next to a new one. Have been lightly lube on probe and using 25 and 34gr. Jsb'. Have asked Huub for recommendation for reg. Any ideas?
Hi. I have a Renegade .25 HP also and planning to fit a Huma reg. I am getting 950fps with heavy mk2s with an external reg. Set at 190bar. Please post yor results when you fit a Huma. I have no wiggle on forend with bipod (Atlas with cant) and getting sub 1/2 inch at 50 yds.
I have a .25 HP and I get about 15 shots at 20 yds. Before the POI starts to drop. What fill pressure are you using? and what velocity are you getting with what pellet. Therefore I am using an external reg. Set at 190 bar. for target shooting. Thanks