Recent content by Impact701

I have to say that I was disappointed with the length of pull. It is only 13⅜ with all 4 spacers installed. I like 14½ length of pull. I had to order another MDT space kit from Midway USA to add 1 more inch.

The Orion Magazines are 10 shots so I filled after 10 shots, I really didn't pay attention to how much air was left I was more focused on getting the rifle setup. I wanted to shoot on paper yesterday to see what the 100 yard groups were like, but we had strong gusty winds all day long.

I think I forgot to mention that my 25 700 is the Pro version 😉 The Pro doesn't have to be removed from the chassis to adjust the reg or the hammer spring tension. Just a ball end 2.5mm and 5mm allen wrench.

I just received a DRS 25 700, it is even better than I thought it would be. Out of the box the reg was set at 128 bar, this shot the H&N 40gr heavy at 935 fps. I set the reg to 150 bar which gave me 970 fps without touching the hammer tension, but it wasn't very consistent, my experience with...

I think he's a distant cousin ! 😂😂 I've been shooting .25 H&N 40gr from my M3 @970fps for quite a while. So it is very underwhelming when I hit a target steel or otherwise with my DRS 22 shooting H&N 34gr @ 960fps I am thinking about converting this DRS to. 25 or maybe get another DRS in .25 ??

I was actually wondering how to make the SHP plenum 10cc bigger. Then it would be the same size as M3 plenum. I would like to shoot the .218 38gr Heavy slug @ 970+ fps but at 170bar I can only reach 955+fps. I would rather not increase the reg anymore, but maybe that is the answer ?

I have a Ninja air tank and a re- purposed Camelback back pack that I carry out to the pdog town. That will provide a day full of shooting.

Yep, 12 shots per fill

12 shots. 7.5 lbs ish with scope.

I don't usually like to post groups, but this group goes wth the crony results. This is shot off of a sandbag no stock at 90 yards.

It is 52 inches long with the STO Falx that is 6 ½ inches long, plus I have a 1 inch 3-D printed buttpad spacer. The Falx does a great job quieting it down. Otherwise it is quite loud.

The 22 700 came from FX with the SHP plenum, heavy slug liner and the heavy impulse valve. Like the Pro.

22 700

I received my slug power kit from Europe Airguns today and got it installed. I installed the slug probe 1st without installing the tungsten hammer weight. I have my reg set at 170bar, the gun was shooting the 34gr H&N Heavy at 989 5 shot average. The 38gr H&N Heavy at 946 5 shot average...

This is awesome news ! I have been a long time shooter of H&N slugs, they have been and continue to be my go to ammunition! I look forward to trying them out !