Recent content by Cees

I also has such Chineese compressor for repair, which motor shaft has broken, The treads of the HP lines has M10x1 , but 1/8 BSPP fits also, the advantage is a multi purpose thread. disadvantage it can explode, thats Chineese mentality. regards Cees and have a save and healthy 2018

Hou Ernest, I had the same problem with the small pin of 2 mm en replaced it with a slightly larger diam of 2,3 mm, no problem anymore regards Cees

Hi Ernest i had the same problem when i tuned the Impact to 130 Joules and also made a new one in stainless steel, which is also 1 mm wider and better o ring fitting and now no problem anymore. alu bronce is also very strong material good work regards Cees

Thats nice Ernest i also have a Boss in .30 and also reduced reg to 150 bar and hammer spring lowered to get 826 fps and get then 76 shots with the 44 gr. presure is going down to 130. it also has a moving barrel which is about 6 mm ging backwards, so no recoil at all, weight about 7 kg, good...

Hoi Ernest, i also worked on the Impact to increase power and have reached in .30 with 50 grains JSB,s 285 m/s =935fps and with 44.75 grains i get 295m/s =967fps. Your idea with extra chamber also crossed my mind, but for testing i made a quick connector Foster on it and add pressure on it, up...

Hi all, I am just starting airguns 1,5 year ago and like it very much and also started to join competition at 110 yards, using a FX Boss which i converted a little doing well , had already first place in the naked class, which is without connected bottle, shooting 30 pellets and some 20 test...