Recent content by BluegrassBill2020

Thanks for all the help. I opted to cut it off. Checked accuracy, Shoots straight and the Lane Quickfill Valve is holding 200 Bar overnight. Bill

Thanks wildcj5, I just needed a little reassurance. Bill

Does the barrel band on the Gamo Urban serve any real purpose other than looks? Just received the Lane Quick Fill, Installed and it leaked pass the big main o-ring and threads. I swung the band out of the way so the Quick Fill could be screwed in all the way, Now no leak holding 200 Bar. Bill

I needed some O-Rings for my Gamo Urban. I Called GAMOUSA and Amanda Mills gave me exceptional help in selecting what I needed. Amanda also sent a full schematic of the Urban. I am very happy with the service I received. Bill

Nice to have a back-up just in case. Bill

Much Ado About Nothing........ Bill

Pump, Co2 or PCP? Hand pump, Compressor or Bottle? Budget? Bill

I have had very good luck using heavy duty Teflon tape. I cut it narrow to fit gauge or fill valve. The Altaros fill valve and gauge are finger tight only and don't leak with no tape. I did have a leak with the Talon SS fill valve, The tape worked however as it wasn't to be used so I replaced...

With the Altaros Regulator only the Altaros fill valve is to be used. I replaced the AF fill valve with a pipe plug. I loosen the plug to degas, Works great. Bill

Dog, With the Altaros installed, Over 100 accurate shots. The Talon power wheel has no effect on FPS. I purchased from Talon Tunes and I believe it had been mucked with, Was missing an internal O-ring. Comes with extra. With the help from Altaros I reassembled Belville washers Etc. Is it...

Now I know. Bill

Thank you for the heads up on this scammer. Sorry this happened to you. Bill

My first was a YH Clone, Using Royal Purple Syn 100, Developed carbon bits under back-flo plate. Repaired and now has Mobil rarus 827 in it. Runs perfect, I have it for a back-up now. Not everyone agrees, Many are using Seco500 or Mobil rarus 827. Bill About 11oz. Should be at top of or just...

Welcome to the rabbit hole. LOL You have just taken the first step. AGN members are the greatest! Bill

My first was a YH Clone, Using Royal Purple Syn 100, Developed carbon bits under back-flo plate. Repaired and now has Mobil rarus 827 in it. Runs perfect, I have it for a back-up now. Not everyone agrees, Many recommend Seco500 or Mobil rarus 827. Bill