Recent content by airgunmonkey

How's that? https://youtu.be/P8vXt6L0NPk

Congratz on the new rifle, it's really nice, cool video too!! Have you checked the muzzle velocity and energy that's shooting? I believe that Evanix rifles are very powerful. Nice one.

How's the new mags test's going? any issues with it so far?

That's your issue with it, as jarmstrong said "barrel lottery", some guys down here in SA had the same problem, their guns couldn't shoot straight, they changed the barrel and solve the problem, also check the reg (another lottery) the stock reg sometimes don't perform as it should, have you try...

https://www.youtube.com/watch?v=bmxyAUvGmps&t=397s

That's why I suggest using cotton, it's light and allows the air and sound to expand between the fibers, it has worked for me every time, like some of us, I make my own silencers, not because I can't afford one but I like the work and challenge, I have several rifles and they are quiet as I have...

I had a Huben K1, also I would tune down the power a bit to around 950/960fps maybe 1 or 2 clicks on the power wheel, all that won't quiet the gun whisper quiet but it will tame it. They are very powerful guns.

I would suggest that, instead just put spacers between the washers, get a smaller diameter spacers ( hair curlers are 2cm in diameter) wrap with a sort of screen and cotton until reaches the ID of the silencer tube and you are good to go, just spacers wont suppress/dampening the sound as there...

Wow, that sucks, have you tryied to fix it yourself?, it could be a seal where you screw in the co2 or a stuck valve/o"ring, I have a 1077 that had the same problem, I thought it was the seal but end up been the valve and a o'ring, there was a lots of gunk/debris inside of it, good clean and...

https://www.youtube.com/watch?v=O8PHsc_SKlg&t=196s That's a very strong rifle...

Nice project, I had one in .22 cal, black sepatia stock, that thing was a canon, shot JSB's 18's @ 1020fps, after a tune down and shot 21's @ 960 fps, very accurate, .600"/.700"at 50m. Will keep an eye on this thread, very interesting to see the outcome Please keep posting the progress.

The HPA regulator should be putting out max 1100psi as co2's, I believe puts out between 850/950 if I am not wrong, so with HPA putting out 1100/1200 max and a good barrel, maybe would be ok. I believe the barrels on these guns are held by the shroud (MCX), so if stablelize the barrel better...

Sweet, thanks for the replies, as any co2's rifles/guns, we cannot expect a lots of power but with a few mods (for fun, that is) I think that can be done, I believe that they (Sig) suppose to launch a PCP version of it...NOT sure), I am thinking, machine a new valve, take the trigger belt...

I have one of those compressors for about a 1 yr and a 1/2 now, only thing that went wrong with it, was the small orings that fits on the main shaft (like a cork tipe of), up to now, fills my tanks and my guns with no issue, as long as you have one of those inline fiters, as they can get a lots...

Thanks for that, I was thinking in convert it HPA but not with the PA tank and adapter, I would, of course get HPA thank and machine my own adapter for it and also change a few things, like barrel stabalizer etc.. and othe mods, just for fun, I like the looks of it, also I know it's a, kinda...