Recent content by Abdur

I made valid points to you which you could incorporate into your operations but you chose to take my words personally and start insulting me.Trauma counseling is generally needed for people who have been under oppressive regimes.Don't project your bad experiences onto me.You are not selling...

I hear you.Ed should realize that we are in the 21st century and capitalism is about consumer orientation.

The retail price of this gun is 79 000 Rubles in Russia,which is 1000USD. See http://edgun-shop.ru/product/edgun-leshiy-2-250/ The retail price is approximately 2000USD in other countries which is too high to say the least. I think it is unethical to charge more then double the retail price as...

Hi PumaCarl.Yes I did file the threads on the valve housing and notch the tube as the regulator needs to be vented.I used a warding file to do this.Feel free to ask if you have any other questions.

Hi Mike. Sorry about the late reply. I was away. The M10 reg from Huma comes screwed onto a plenum when you purchase it. At the bottom of the plenum there is an O ring which runs along the outer circumference of it. When you unscrew the original reg out from the valve, you will see a lip on the...

Hi guys. Just want to share my experience with my P15 in .22 calibre. I just fitted a Huma reg for a M10 on my P15 as the tube diametre on the P15 and M10 is the same. As you know, the M10 reg comes with a plenum. Measured this plenum volume at 13cc with a syringe and water. Shooting the JSB...