Recent content by 396ranger

Northern tool. I use ingersoll rand compressor oil. It will turn black almost immediately but works 

I purchased a tuxing compressor which is similar. The 220v US plug was one for a regular 120v outlet they just made both flat prongs hot and no ground. Which works over seas but not the best for the US. I ended up removing the plug and wired in a cord directly to the terminals than put a 220v...

Called today they are sending the new assembly out for free. Great customer service. It's nice to see some companies still care about their customers. 

The o-ring is definitely bad. I have a o-ring kit but might see what crosman says 

My fill valve was not releasing after filling so l took it apart and found the o-ring is bad. Where do I get a new one? What else should I do while it's down and kind of apart? The guns is under 1 year old and maybe 200 pellets or so shot threw it. 

156.73

796

1400.95

Not sure where "southern mn" Vintage paintball can fill it when their tank if full. You can try a welding supply store (oxygen supply, toll welding,) they will more than likely irate you like I got. I tried the local fire department and got shot down so I ended up purchasing a china...

450.25

You can check your compressor motor name plate and make sure it is single phase 220v and if it is you are good. It should have a double braker like your air conditioner.

You should be able to do that just cut the cord end off if you didn't get the correct one and put the same one as your other compressor 

You can do it either way. I personally wanted to put a ground on the compressor so that is how I did it. Finally got the front cover also. I ran it and it was having issues pumping air so lucky me I had to take the thing apart. The 2nd stage compressor rings seemed like the stretched...

40

Yep waiting sucks. I did do a search on the web being impatient and found a couple similar compressors as far as the motor goes that are the same with just a different compressor head.